[How To]: Flash the PULSe 4K MINI.

A simple tutorial how to flash the new PULSe Mini 4K.

How to Flash PULSe 4K MINI:

What you need before we start:

• A USB stick formatted to FAT32.
• Image of your choice (DOWNLOAD)
• Compression software such as 7zip, Winrar, Winzip
• Format a USB stick to FAT32.
• Download the image of your choice and extract it to your desktop.

The Flashing method:

• Download the E2 firmware, unzip it and copy the 3 files to the root of your USB stick.
• Insert a USB key with software or backup into the receiver.
• In the receiver menu, first select the Standby / Restart option and then the Recovery mode. Confirm the selection with the OK button on the control.
• The receiver restarts and starts the automatic installation of the software or backup. Do not turn off the receiver or press the control buttons.
• Wait for the installation process to complete.
• When the installation is complete, the receiver will restart automatically.

The flashing process should take approximately 2 to 5 minutes to complete, while the receiver is being flashed, it´s very important that you DO NOT power off the receiver for any reason, as this can cause permanent damage to your equipment!